Sale!

Raspberry Pi Camera V2 With M12 FOV160 Len

Original price was: $22.99.Current price is: $18.99.

Wiki:  https://github.com/pibiger-tech/picam-imx219

Features:

  • raspberry pi camera v2 Sensor Type: Low-cost 8 Megapixel IMX219 Sensor, Static Images: 3280(H)x2464(V) pixel, Support 1080p@30fps, 720p@60fps and 640x480p@90fps video record.
  • Lens: M12 Lens Seat, FOV160 Degree Lens, Focal Length: 2.8mm, Aperture (F) : 2.2, IR: 4G+IR.
  • Board Size: 32mm x 32mm.
  • Packing List:
    • CAM-IMX219-FOV90 Module x1,
    • 15PIN To 22PIN FPC Cable x1,
    • 15PIN To 15PIN FPC Cablex1
    • FOV160 Degree Camera Lens With M12 Lens Holder x1.
Quantity Discount (%) Price
1 - 99 — $18.99
100 - 499 5 % $18.04
500 - 999 10 % $17.09
1,000+ 15 % $16.14
x
Compare
Category: SKU: picam-imx219-fov160

Description

RPI 8mp camera picam-imx219

raspberry pi camera v2 Sensor Type: Low-cost 8 Megapixel IMX219 Sensor, Static Images: 3280(H)x2464(V) pixel, Support 1080p@30fps, 720p@60fps and 640x480p@90fps video record.

Lens: M12 Lens Seat, FOV160 Degree Lens, Focal Length: 2.8mm, Aperture (F) : 2.2, IR: 4G+IR.

Board Size: 32mm x 32mm.

 

 

 

 

 

 

 

 

Specification

Sensor Type: Low-cost 8 Megapixel IMX219 Sensor, Static Images: 3280(H)x2464(V) pixel, Support 1080p@30fps, 720p@60fps and 640x480p@90fps video record.
Camera Lens: M12 Lens Seat, FOV90 Degree Lens, Focal Length: 2.8mm, Aperture (F) : 2.2, IR: 4G+IR.
Packing List: PICAM-IMX219-FOV90 Module x1, FPC Cable x1, FOV90 Degree Camera Lens x1.
Support Hardware Raspberry PI4/PI3+/PI3/PI2/PI0/CM4/CM3+/CM3/Jetson Nano/Jeton Xaiver

Quick Start for Raspberry PI Series

 

Step1, Modify config.txt

  • sudo nano /boot/config.txt

For the latest version raspberry Pi OS, it should be

  • sudo nano /boot/firmware/config.txt

Step2, Add below content to the last line

  • dtoverlay=imx219

Step3, Reboot and use below command to preview

  • libcamera-hello -t 0

 

 

Quick Start for Nvidia Series

Step 1: Open the terminal and execute the following

  • sudo /opt/nvidia/jetson-io/jetson-io.py

Step 2: Select Configure Jetson Nano CSI Connector

Step 3: Select Configure for compatible hardware

Step 4: Select the camera that you want to use

  • Camera IMX219 DUAL

Step 5: Select Save pin changes

Step 6: Select Save and reboot to reconfigure pins

Step 7: Press any key on the keyboard and the device will reboot with the applied camera configuration

 

For CAM0 port

  • nvgstcapture-1.0 sensor-id=0

For CAM1 port

  • nvgstcapture-1.0 sensor-id=1

Additional information

PI Camera

, , ,

Product Enquiry

Related products